項目/item | 單位/unit | ZLM-L2013 | ZLM-L2016 | ZLM-L2518 | ZLM-L3018 | |
工作臺面尺寸 | Work surface size | mm | 2000*1000 | 2000*1300 | 1600*2500 | 1600*3000 |
工作臺移動方向行程(X) | X-axis travel | mm | 2000 | 2000 | 2500 | 3000 |
主軸滑座移動方向行程(Y) | Y-axis travel | mm | 1300 | 1650 | 1800(含換刀行程2000) | 1800(含換刀行程2000) |
主軸上下移動方向行程(Z) | Z-axis travel | mm | 800 | 800 | 1000 | 1000 |
龍門寬度 | Gantry width | mm | 1300 | 1660 | 1800 | 1800 |
龍門過高 | Gantry is too high | mm | 1060 | 1100 | 1300 | 1300 |
主軸端面至工作臺面距離 | Distance from spindle end face to work table | mm | 190-990 | 250-1050 | 150-1150 | 150-1150 |
工作臺T型槽(數目-尺寸*間距) | Table T-slot | mm | 7-22*140 | 7-22*170 | 9-22*180 | 9-22*180 |
主軸規格(型號/安裝直徑) | Spindle Specifications | BT50/φ190 | ||||
主軸傳動方式:皮帶 | Spindle drive mode:belt | r/min | 6000r/min,傳動比1:1(1.5:1選配) | |||
主軸傳動方式:ZF減速機+皮帶(選配) | Spindle drive mode:ZF gear reducer+belt(op) | r/min | 轉速6000r/min,傳動比4:1 | |||
快移進給速度 | Fast forward feed rate | m/min | 20/20/15 | |||
切削進給速度 | Cutting feed rate | m/min | 10 | |||
三軸滾珠絲杠規格/螺距 | Three-axis ball screw specifications/pitch | X:6310,Y:5010,Z:5010 | X:6310,Y/Z:5010 | X:6312,Y/Z:5010 | X:8020,Y/Z:5010 | |
主軸電機選用推薦 | Spind motor selection recommendation | kw | 15-18.5 | 15-18.5 | 18.5-22 | 18.5-22 |
X/Y/Z三相伺服電機推薦 | X/Y/Z 3-phase servo motor recommendation | N.m | X:38,Y:30,Z:30(抱閘) | |||
光機外形尺寸(長*寬*高) | Optical machine dimensions(L*W*H) | mm | 5540*2720*3320(光機) | 5590*3630*3830(光機) | 6700*4030*3900 | 7700*4030*3900 |
工作臺承重 | Workbench load | t | 3 | 4 | 7 | 8 |
機器重量 | Machine weight | t | 16.5 | 22 | 27 | 32 |
控制器 | Controller | Mitsubishi/FANUC/SIEMENS |