項目/item | 單位/unit | ZLM-L3022 | ZLM-L4022 | ZLM-L4027 | ZLM-L6032 | ZLM-L8032 | |
工作臺面尺寸 | Work surface size | mm | 2000*3000 | 2000*4000 | 2300*4000 | 2500*6000 | 2500*8000 |
工作臺移動方向行程(X) | X-axis travel | mm | 3000 | 4000 | 4000 | 6000 | 8000 |
主軸滑座移動方向行程(Y) | Y-axis travel | mm | 2200(副行程:2700) | 2200(副行程:2700) | 2700(副行程:3050) | 3200(副行程:3800) | 3200(副行程:3800) |
主軸上下移動方向行程(Z) | Z-axis travel | mm | 1000 | 1000 | 1000 | 1250 | 1250 |
龍門寬度 | Gantry width | mm | 2300 | 2300 | 2700 | 3200 | 3200 |
龍門過高 | Gantry is too high | mm | 1400 | 1400 | 1400 | 1780 | 1730 |
主軸端面至工作臺面距離 | Distance from spindle end face to work table | mm | 280-1280 | 280-1280 | 280-1280 | 350-1600 | 300-1550 |
工作臺T型槽(數目-尺寸*間距) | Table T-slot | mm | 9-28*200 | 9-28*200 | 11-28*200 | ||
主軸規格(型號/安裝直徑) | Spindle Specifications | BT50/φ200 | |||||
主軸傳動方式:皮帶 | Spindle drive mode:belt | r/min | 6000r/min,傳動比1.5:1(1:1選配) | ||||
主軸傳動方式:ZF減速機+皮帶(選配) | Spindle drive mode:ZF gear reducer+belt(op) | r/min | 轉速6000r/min,傳動比4:1 | ||||
快移進給速度 | Fast forward feed rate | m/min | 20/20/15 | 15/15/12 | 15/15/12 | 15/15/12 | 15/15/12 |
切削進給速度 | Cutting feed rate | m/min | 8 | 8 | 6 | 5 | 5 |
三軸滾珠絲杠規格/螺距 | Three-axis ball screw specifications/pitch | X:8020,Y:6312,Z:5010 | X:8020,Y:6312,Z:5010 | X:8020,Y:6316,Z:5010 | X:10020,Y:8020,Z:6316 | X:10020,Y:8020,Z:6316 | |
主軸電機選用推薦 | Spind motor selection recommendation | kw | 18.5-22 | 18.5-22 | 18.5-22 | 18.5-22 | 18.5-22 |
X/Y/Z三相伺服電機推薦 | X/Y/Z 3-phase servo motor recommendation | N.m | X:50,Y:40,Z:30(抱閘) | X:60,Y:40,Z:40(抱閘) | X:60,Y:40,Z:40(抱閘) | ||
光機外形尺寸(長*寬*高) | Optical machine dimensions(L*W*H) | mm | 7750*4740*4100 | 9750*4740*4100 | 9750*5140*4100 | 14440*6670*5470 | 14240*6670*5470 |
工作臺承重 | Workbench load | t | 10 | 12 | 12 | 25 | 30 |
機器重量 | Machine weight | t | 37.5 | 43 | 50 | 86 | 108 |
控制器 | Controller | Mitsubishi/FANUC/SIEMENS |